Icom IC-F3262DT Instruction Manual page 28

Vhf/uhf transceivers
Hide thumbs Also See for IC-F3262DT:
Table of Contents

Advertisement

4
BATTERY CHARGING
D
Rapid charging with the BC-121N+AD-106
The optional BC-121N allows up to 6 battery packs to be si-
multaneously charged.
Charging time: Approximately 3.5 hours with the BP-232WP
The following items are additionally required.
(purchase separately)
• Six AD-106
charger adapters
• An AC adapter or the OPC-656 DC power cable
AC adapter
23
Turn OFF the power
Transceiver
Battery
pack
AD-106 charger
adapters are installed
in each slot.
OPC-656* DC power cable
(Connect with a DC power supply;
13.8 V/at least 7 A)
*Polarity of the OPC-656
Red line :
Black line :
IMPORTANT: Battery charging caution
Ensure the guide tabs on the battery pack are correctly
aligned with the guide rails inside the charger adapter. This
illustration is for the BC-160.
Guide rail
CAUTION:
When using the OPC-656 DC power cable
NEVER reverse the polarity when connecting the OPC-
656 to a power source. This will ruin the battery charger.
OPC-656: Red line: +, Black line: _
Tabs

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-f4262dsIc-f3262dsIc-f4262dt

Table of Contents