D Programming Group Id - Icom IC-M412 Instruction Manual

D Deleting Address ID
q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "ADDRESS," then push [ENT].
e Push [Y] or [Z] to select "DEL INDV ID," then push [ENT].
• When no address ID is programmed, "NO ID" is displayed.
r Push [Y] or [Z] to select a desired ID name for deleting
and then push [ENT].
• "READY" appears.
t Push [ENT] to delete the selected address ID and return
to normal operation.

D Programming Group ID

q Push [MENU] to enter the DSC menu.
w Push [Y] or [Z] to select "ADDRESS," then push [ENT].
e Push [Y] or [Z] to select "ADD GROUP ID," then push [ENT].
Scrolls
r Push [Y] or [Z] to set the 9-digit Group ID, then push [ENT].
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the programming, if desired.
The first one digit is specified '0' for a Group ID.
The first two digits are '0' for any Coast station ID.
6
DSC OPERATION
Scrolls
☞ Continued on the next page
6
15