Automatic Acknowledgement; Dsc Operation; Offset Time - Icom IC-M412 Instruction Manual

n Automatic acknowledgement
This item sets the automatic acknowledgement function ON
or OFF.
When a position request or polling request call is received,
transceiver automatically transmits a position reply or polling
reply call.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select "AUTO ACK," then push [ENT].
e Push [s] or [t] to turn the automatic acknowledgement
function ON or OFF.
r Push [ENT] to set the Automatic acknowledgement set-
ting.
• Push [CLR] to cancel and exit the setting, if desired.
n Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [MENU] to enter the DSC menu.
w Push [s] or [t] to select "OFFSET TIME," then push
[ENT].
Scrolls
e Set the offset time from the UTC (Universal Time Coordi-
nated) time using [s] or [t].
• Push [CH/WX] or [16] to move the cursor forward or backward.
• Push [CLR] to cancel and exit the setting, if desired.
r Push [ENT] to program and then to exit the programming
mode.
The local time indication is not available when the GPS
receiver (sentence formatter RMC) is connected, the
transceiver's display indicates UTC time only.
6

DSC OPERATION

Scrolls
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
43