Optional Separation Kit) - Icom IC-F8100 Instruction Manual

6
CONNECTION AND INSTALLATION
■ RMK-6 (Optional Separation kit)
The RMK-6 allows you to install the IC-F8100's Front
panel separately from the Main unit for added installa-
tion convenience and operation. Use either the optional
OPC-607, OPC-608, OPC-609 or OPC726
with the RMK-6.
cable
The RMK-6 is the same cable the one in as the separa-
tion kit for the Separated type transceiver.
D Supplied Accessories
Flat washers Mounting screws
(M5) (M5 × 12 mm)
Spring washers Self-tapping screws
(M5) (M5 × 16 mm)
Nuts Screws
(M5) (M3 × 8 mm)
53
separation
RMK-6 with Mounting
bracket
Cable clamps
(Screws M2.6 × 5 mm)
Hex socket screws
D Separation
The optional OPC-607 (3 m; 9.8 ft), OPC-608 (8 m;
26.2 ft), OPC-609 (1.9 m; 6.2 ft) or OPC-726 (5 m;
16.4 ft)
separation cable
stalling the transceiver front panel and Main unit.
q First, make sure the transceiver's power is OFF,
then disconnect the DC power cable.
w Remove the knob bolts and mounting bracket from
the RMK-6.
e Unscrew the 4 hex socket screws using an allen
wrench, then remove the front panel from the trans-
ceiver in the direction of the arrow.
• Separate the RMK-6's front panel attachment and Main
unit attachment in the same way.
Transceiver
r Disconnect the connection cable from the front
panel.
Connection cable
is required for separately in-
RMK-6
Main unit
Front panel
Connection cable
Front panel