Receive And Transmit - Icom IC-F8100 Instruction Manual

ï Clear Talk function
The Clear Talk function enhances desired signals in
the presence of noise by using the DSP circuit.
Clear Talk function OFF
Noise components
ï IF Filter selection
The transceiver has three passband IF filter widths
for each mode.
[�]
Clear Talk function ON
Desired
signal (CW)
/
[�]

RECEIVE AND TRANSMIT

➥ Push [C TALK](8) to turn the Clear Talk function
ON or OFF.
• "C" appears when the Clear Talk function is ON.
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "User Menu," and
then push [4].
e Push [r] or [s] to select "Bandwidth"
y Push [t](§) or [u](§§§) to select the IF filter width,
NARROW, MID or WIDE.
u Push [MENU](HOME) twice to return to the nor-
mal operating screen.
3
Appears
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18