Vfo Operation; Basic Operation - Icom IC-F8100 Instruction Manual

Hf transceiver

Hide thumbs Also See for IC-F8100:

Table of Contents

■ VFO operation

In the VFO mode, you can set a desired operating fre-

quency, operating mode or split frequency function.

NOTE:

• The VFO mode operation can be disabled in the

Admin Menu.

• While in the VFO mode, the Selcall, ALE features

or the Emergency key cannot be used.

• Entering the VFO mode

Push [VFO](2) to turn the VFO mode ON or OFF.

• Frequency setting

q Push [A/B](§) to select VFO A or VFO B.

w Push [4] to enter the frequency setting mode.

e Push [t](§) or [u](§§§) to move the cursor to se-

lect the desired digit to change.

• The cursor is displayed below the selected digit.

r Push [r] or [s] to change the frequency.

t Push [4] to exit the frequency setting mode.

• Turning ON the split frequency function

q Push [A/B](§) to select VFO A or VFO B, and

separately set the receive and transmit frequen-

cies.

w Push [Split](§§§) to turn the split frequency func-

tion ON.

• The TX frequency appears below the RX frequency.

• Pushing [A/B](§) changes the VFOs between trans-

mit and receive.

e To turn OFF the split frequency function, push

[Split](§§§) again.

[�]

[��]

Table of Contents