Rinsing; Over Flow Rinse; Additional Rinse - Samsung Washing machine Owner's Instructions Manual

Hide thumbs Also See for Washing machine:
Table of Contents

Advertisement

RINSING

1. Set the CYCLE SELECTOR KNOB to 'WASH RINSE' .
(In case no drain pump) ('WASH' in case drain pump)
(Without pump)
2. Supply the proper amount of water as not to
overflow the top of the washing tub.

OVER FLOW RINSE

1. Keep suppling water
Adjust water pressure to ensure that the
amount of water supplied does not exceed
that water drained.
(Without pump)
2. Set the WASH TIMER 6~8
minutes.

ADDITIONAL RINSE

After rinsing you can select this course for more effective rinse (Don't select only this course for rinse.)
1
Load the laundry evenly into the
spin basket.
2
Set the WATER SELECTOR
KNOB to SPIN (a) and
CYCLE SELECTOR KNOB
to 'DRAIN'(b).
3
Supply water for about 1
minute. Adjust the water
flow to prevent overflow
from the wash tub.
WT80J7-02206A_EN.indd 5
3. Set the WASH TIMER 2~3minutes.
4. Drain the water. Set the CYCLE SELECTOR KNOB
5. Repeat this cycle until drain water is clean. (2~3
(With pump)
6. In case no drain pump.
3. As soon as the WASH TIMER shuts off, turn off the
4. Set the CYCLE SELECTOR
(With pump)
inner lid
safety cover
(b)
(a)
1min.
5
to 'DRAIN'
cycles)
- Be sure lay the drain hose down.
In case drain pump.
- Be sure place the drain hose in sink or bath.
water tap.
KNOB to 'DRAIN' .
4
5
Close the spin dryer lid.
6
Set the AIR TURBO SPIN
TIMER 2~3 minutes.
After stopping water
supply, cover the
laundry with safety
cover and close the
inner lid.
2006-02-17 ¿ÀÈÄ 2:43:24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents