Rinsing; Over Flow Rinse; Additional Rinse - Samsung SWT70A1 Owner's Instructions Manual

RINSING

1. Set the WATER GUIDE
KNOB to "WASH"
(For SWT70B1, SWT75A1)
2. Set the CYCLE SELECTOR KNOB to
'WASH . RINSE'
WASH . RINSE
DRAIN
CYCLE SELECTOR
3. Supply the proper amount of water
as not to overflow the top of the
washing tub.

OVER FLOW RINSE

1.Keep suppling water
to ensure that the amount of water supplied
does not exceed that water drained.)
WASH . RINSE
DRAIN
CYCLE SELECTOR
2.Set the WASH
TIMER 6~8minutes.

ADDITIONAL RINSE

After rinsing you can select this
1
course for more effective rinse
(Don't select only this course
for rinse.) Load the laundry
evenly into the spin basket.
2
Set the WATER SELECTOR KNOB to SPIN for
SWT70B1, and CYCLE
SELECTOR KNOB to
'DRAIN'.
3
Supply water for about 1minute.
Adjust the water flow to prevent
overflow from the wash tub.
WASH SPIN
WASH
RINSE DRAIN
CYCLE SELECTOR
(in case drain pump "WASH)
(adjust water pressure
WASH
RINSE DRAIN
CYCLE SELECTOR
(in case drain pump "WASH)
WASH TIMER
(SHOWER RINSE FOR SWT70B1, SWT75A1)
WASH SPIN
CYCLE SELECTOR
4. Set the WASH TIMER
2~3minutes.
5. Drain the water.
Set the CYCLE
SELECTOR KNOB to
'DRAIN'.
6.Repeat this cycle until drain water
is clean. (2~3 cycle)
3.As soon as the WASH TIMER
shuts off, turn off the water tap.
WASH TIMER
4. Set the CYCLE
SELECTOR KNOB
to 'DRAIN'.
After stopping water
4
supply, cover the
laundry with safety cover
and close the inner lid.
5
Close the spin dryer lid.
DRAIN
6
Set the SPIN DRY
TIMER 2~3 minutes.
4
WASH TIMER
DRAIN
CYCLE SELECTOR
DRAIN
CYCLE SELECTOR
inner lid
safety cover
SPIN DRY TIMER