Rinsing; Over Flow Rinse; Additional Rinse - Samsung WT80J8 Owner's Instructions Manual

Top-loading washer
Table of Contents

Advertisement

RINSING .....................................................................................................................................

1. Set the CYCLE SELECTOR KNOB to
'WASH RINSE'.(In case no drain pump.)
('WASH' In case drain pump.)
(WITHOUT PUMP)
2. Supply the proper amount of water as not to

OVER FLOW RINSE ..................................................................................................................

1.Keep suppling water
Adjust water pressure to ensure that
the amount of water supplied does not
exceed that water drained.
(WITHOUT PUMP)
2. Set the WASH TIMER
6~8 minutes.

ADDITIONAL RINSE .................................................................................................................

After rinsing you can select this course for more effective rinse (Don't select only this course for rinse.)
1
Load the laundry evenly
into the spin basket.
2
Set the WATER SELECTOR KNOB to
SPIN(a) and CYCLE
SELECTOR KNOB to
'DRAIN'.(b)
Supply water for about 1minute.
3
3. Set the WASH TIMER 2~3 minutes.
4. Drain the water.Set the CYCLE SELECTOR KNOB
to 'DRAIN'.
5. Repeat this cycle until drain water is clean. (2~3
cycles)
(WITH PUMP)
6. In case no drain pump.
- Be sure lay the drain hose down.
In case drain pump.
.
- Be sure place the drain hose in sink or bath.
3. As soon as the WASH TIMER shuts off, turn off
the water tap.
4. Set the CYCLE SELECTOR
(WITH PUMP)
KNOB to 'DRAIN'.
(b)
(a)
5
4
After stopping water
supply, cover the
laundry with safety cover
and close the inner lid.
5
Close the spin dryer lid.
6
Set the AIR TURBO
SPIN TIMER 2~3 minutes.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents