Advertisement
SPIN DRY
1. Transfer the clothes into the
spin basket and arrange the
clothes evenly.
3. Close the spin dryer lid.
RINSING
1. Set the CYCLE SELECTOR KNOB to 'WASH
HEAVY'.
2. Supply the proper amount of water as not to overflow the top of
the washing tub.
3. Set the WASH TIMER 2~3 minutes.
4. Drain the water. Set the CYCLE SELECTOR KNOB to 'DRAIN'.
5. Repeat this cycle until drain water is clean. (2~3 cycles)
OVERFLOW RINSE
1. Keep supplying water
• Adjust water pressure
to ensure that the
amount of water
supplied does not
exceed that water
drained.
3. As soon as the WASH
TIMER shuts off, turn
off the water tap.
2. Be sure to
attach the safety
cover and close
the inner lid.
4. Set the SPIN DRY
TIMER 1-5
minutes.
2. Set the WASH TIMER
6~8 minutes.
4. Set the CYCLE
SELECTOR KNOB to
'DRAIN'.
ADDITIONAL RINSE
1. After rinsing you can select
this course for more effective
rinse (Don't select only this
course for rinse.) Load the
laundry evenly into the spin
basket.
3. Supply water for about 1
minute. Adjust the water flow
to prevent overflow from the
wash tub.
5. Close the spin dryer lid.
CLEANING THE MACHINE
CLEANING THE LINT FILTER
• If the dregs are filled up in the lint filter after
finishing the wash, push down and pull it out as
shown in figure. Remove the collected lint and
rinse the filter net.
FILTER
OVERFLOW
• Pull the upper side of the overflow filter with two fingers into the hole
'A' in the direction of arrow as shown in the figure.
CLEANING THE WASH TUB
• Wipe off strains on the cabinet and operation panel with soft cloth. Do not use
benzene, thinners, cleanser, or wax, nor scrub the washer with a brush. Painted
surfaces or plastic parts will be damaged.
4
2. Set the WATER
SELECTOR KNOB to
SPIN and CYCLE
SELECTOR KNOB to
'DRAIN'.
4. After stopping water
supply, cover the
laundry with safety
cover and close the
inner lid.
6. Set the SPIN DRY
TIMER 2~3 minutes.
1
2
Advertisement
