Selecting The Automatic Operating Mode - Samsung AQ12F Series User Manual

Selecting the Automatic Operating Mode

You can start the air conditioner in Auto mode from your remote
control. In the Auto mode, the cooling operation is selected
automatically. You can also raise or lower the temperature but not
the fan speed.
1
If necessary, press the button.
Result: N The operation indicator on the indoor unit lights up.
N The air conditioner starts up in the mode selected
when the unit was last used.
N The indoor unit beeps.
The air conditioner is fitted with protection mechanism
IMPORTANT
to prevent the unit from being damaged when it is started
immediately after being:
N Plugged in
N Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result: N The indoor unit beeps each time you press the
N The air conditioner runs in the Auto mode.
Note You can change modes at any time.
3 To adjust the temperature, press the
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
N Each time you press the
- The temperature is adjusted by 1°C
- The indoor unit beeps
button.
button one or more times until
button:
9
E -