Removing Excess Humidity - Samsung AQ12F Series User Manual

Removing Excess Humidity

- 12
E
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the button.
Result:
N The operation indicator on the indoor unit lights up.
N
The air conditioner starts up in the mode selected
when the unit was last used.
N
The indoor unit beeps.
The air conditioner is tted with a protection mechanism
IMPORTANT
to prevent the unit from being damaged when it is started
immediately after being:
N Plugged in
N Stopped
lt will start up normally after three minutes.
2
If the is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result: N
The indoor unit beeps each time you press the
N
The air conditioner runs in the Dry mode.
Note You can change modes at any time.
3 To adjust the temperature, press the
the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result:
Each time you press the
N
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts removing the excess humidity;
N
the quantity of air is adjusted automatically.
N The fan is running in auto mode.
4 To control the direction of the air flow, refer to pages 15.
button.
button one or more times until
button: