Table of Contents
Advertisement
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.
1
If necessary, press the
The air conditioner starts up in Cool mode with
Result:
Turbo fan speed.
The 5 Way indicator on the indoor unit lights up.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control, press the
MODE button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the MODE button.
The air conditioner runs in DRY mode.
N N
o o
t t
e e
You can change modes at any time.
N N
o o
t t
e e
3
To adjust the temperature, press the TEMPERATURE buttons one or
more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
Each time you press the TEMPERATURE buttons:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 15.
(On/Off) button.
13
E-
Advertisement
Table of Contents
