System Reset - Jensen VM9214BT Operating Instructions Manual

NOTE: The EQ mode will automatically change to "USER" when
individual audio functions are adjusted.
The Audio menu will automatically exit after a few seconds of inactivity. To exit
quickly, touch the top left corner of the screen or press and hold the rotary
encoder (11).

System Reset

To correct a system halt or other illegal operation, use the
tip of a pen to press the reset button (12) located on the
front bottom-right corner of the unit. After a system reset,
the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play
once the reset is complete.
Steering Wheel Control (SWC)
The VM9214BT is compatible with the PAC (Pacific Accessory Corporation)
steering wheel control adapter SWI-PS and the Metra ASWC steering wheel
control adapter. A 3.5mm female connector (labeled "SWC Interface") on the
back of the head unit allows connectivity to the PAC adapter. Please refer to
the instructions included with the PAC and Metra adapters for detailed
installation information.
SWC Functions
The following controls are available for most vehicles:
1. Vol Down
2. Vol Up
3. Mute
4. Seek Down / Previous Track / ** Preset Down
5. Seek Up / Next Track / ** Preset Up
6. SRC (Source)
7. ** Select
8. ** Select
9. Band
Table 3: Audio Adjustments
Audio Function
FAD
BAL
Adjustable Range
Grid
Grid
12
VM9214BT
[RESET] Button