Advertisement
STEP 2
(See Diagram 2)
A.) Two people to assemble this step are highly recommended. Do not tighten
the Bolts until instructed to do so.
B.) Attach the pivots on the Rear Left & Right Support Tube (#40) & (#41) to the back
holes on the Left & Right Support (#8) & (#9). Secure each pivot to each Support
with one M10 x 4 5/8" Allen Bolt (#14), one Ø ¾" Washer (#6), and one M10
Aircraft Nut (#7).
C.) Attach the pivots one Front Left & Right Support Tube (#44) & (#45) to the front
holes on the Left & Right Support. Secure each pivot to each Support with one
M10 x 4" Allen Bolt (#13), one Ø ¾" Washer (#6), and one M10 Aircraft Nut (#7).
6
DIAGRAM 2
Advertisement
