Operation - Heath Zenith Secure Home SH-9250-BZ Owner's Manual

Motion sensing security light
Table of Contents

Advertisement

Available languages

Available languages

Operation

Mode:
On-Time:
Test
5 Sec
Auto
1, 5, or 20 min.
Manual
Until Dawn*
* resets to Auto Mode at dawn.
RANGE
Turn Range control to the desired
setting.
TEST MODE
Slide the ON-TIME switch to
TEST and turn the Range control
to the center of its adjustment.
AUTO MODE
Put the ON-TIME switch in the 1,
5, or 20 minute position.
Works: Day Night
x
x
x
x
RANGE
MAX
MIN
TEST 1
RANGE
MAX
ON-TIME
MIN
TEST 1
5
20
ON TIME
TEST 1 5 20
MANUAL MODE
Manual Mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
ON-TIME
Manual Mode only works with
the ON-TIME switch in the 1,
5
20
5, or 20 minute position.
TEST
AUTO
MANUAL MODE
* If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time, the control will
be in the AUTO mode.
-12-
1 Second OFF
then...
... back on.
Move ON-TIME Switch
to 1, 5, or 20 minutes
Flip light switch
off for one second
then back on*
598-1341-00

Advertisement

Table of Contents
loading

This manual is also suitable for:

Secure home sh-9250-wh

Table of Contents