Channel - Sort; Channel Add/Delete - Samsung CS29Z45Z39 Owner's Instructions Manual

Channel - Sort

This operation allows you to
TV
change the programme numbers
From
To
of stored channels. This
Store
operation may be necessary
after using auto store.
◆ From: Channel number to Move
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels,
Sort
including those received via
: P 1
: P--
cable networks. When storing
: ?
channels manually, you can
choose:
- Whether or not to store each
Adjust Return
of the channels found
- The programme number of each stored channel which
you wish to identify
◆ Programme (Programme number to be assigned to a
channel)
◆ Colour System:
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
◆ Store (When you store the channel and associated
programme number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
☛
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
Manual Store
TV
Programme : P 3
Colour System : AUTO √ √
Sound System : BG √ √
Search : 46MHz
Channel : C 4
Store : ?
Move Adjust Return
English - 5
Channel - Add/Delete
You can exclude channels you
TV
have chosen from the channels ... ... More
P 1 : Added
you scanned. When you scan
P 2 : Added
P 3 : Added
through the stored channels,
P 4 : Added
those you have chosen to skip
P 5 : Added
† † More
are not displayed. All of the
Move
channels that you did not
specifically choose to skip are displayed during scanning.
Method:
ENTER, √ : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
œ/√ : You can obtain a sharp
P 1
and clear picture and good
sound quality.
.../† ➜ ENTER : You can reset
Move
Adjust
the setting.
MENU : You can memorise adjusted picture or sound.
Add/Delete
Enter Return
Fine Tune
0
Reset
Store
Return