Table of Contents
Advertisement
AA68-03967C-00Eng_0506
5/7/08
Channel - Sort
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
All manuals and user guides at all-guides.com
6:29 PM
Page 5
Channel - Manual Store
You can store channels,
Sort
TV
including those received via
From
: P 1
To
: P--
cable networks. When storing
Store
:
?
channels manually, you can
choose:
- Whether or not to store each
Move
Adjust
Return
of the channels found
- The programme number of each stored channel which
you wish to identify
◆ Programme (Programme number to be assigned to a
◆ Colour System:
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
◆ Store (When you store the channel and associated
➢
☛
TV
Programme
Colour System : AUTO
Sound System
Search
Channel
Store
Move
channel)
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
programme number)
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
English - 5
Channel - Add/Delete
You can exclude channels you
Manual Store
: P 3
have chosen from the channels
√ √
you scanned. When you scan
: BG
√ √
:
46MHz
through the stored channels,
: C 4
those you have chosen to skip
:
?
are not displayed. All of the
Adjust
Return
channels that you did not
specifically choose to skip are displayed during scanning.
Method:
ENTER, √ : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
œ/√ : You can obtain a sharp
and clear picture and good
sound quality.
.../† ➜ ENTER : You can reset
the setting.
MENU : You can memorise adjusted picture or sound.
Add/Delete
TV
... ... More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
† † More
Move
Enter
Return
Fine Tune
P 1
0
Reset
Move
Store
Adjust
Return
Advertisement
Table of Contents
