Channel Add/Delete; Channel - Sort - Samsung CS-21M21MH Owner's Instructions Manual

AA68-03700A-00Eng_asia 6/3/05
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢
To stop the search before it
has finished, press the
ENTER button.
When finished, the Sort menu
is displayed. To sort the stored
channels into the desired
numerical order, refer to
"Channel - Sort". To exit without sorting, press the EXIT
button.

Channel - Sort

This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
N From: Channel number to
be changed.
N To: New channel number to be identified.
N Store: Confirmation the exchange of channel numbers.
All manuals and user guides at all-guides.com
5:00 PM Page 4
Channel - Manual Store
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
- Whether or not to store each
of the channels found
- The programme number of each stored channel which
Auto Store
TV
you wish to identify
Area : Belgie Asia/W.Europe
CIS/E.Europe
Search
China
N Programme (Programme number to be assigned to a
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
N Colour System:
America
Move Enter Return
N Sound System: BG/DK/I/M
Search
N Search (When you do not know the channel numbers):
P 1 C-- ----- 102MHz
7 %
Stop
Enter Return
N Channel (When you know the number of the channel to
N Store (When you store the channel and associated
➢
☛
Sort
TV
From : P 1 -----
To : P-- -----
Store : ?
Move Adjust Return
TV
Programme
Colour System : AUTO
Sound System
Search
Channel
Store
Move
channel)
AUTO/PAL/SECAM/NTSC4.43/NTSC3.58
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
be stored)
➢
You can also select the channel number directly by
pressing the numeric buttons (0~9).
programme number)
If there is no sound or abnormal sound, re-select the
sound standard required.
Channel mode
N P (Programme mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
N C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
N S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
English - 4
Channel - Add/Delete
You can exclude channels you
Manual Store
have chosen from the channels
: P 3
√ √
you scanned. When you scan
: BG √ √
: 46MHz
through the stored channels,
: C 1
those you have chosen to skip
: ?
are not displayed. All of the
Adjust Return
channels that you did not
specifically choose to skip are displayed during scanning.
Method:
ENTER ➜ .../† ➜ ENTER : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
œ/√ : You can obtain a sharp
and clear picture and good
sound quality.
.../† ➜ ENTER : You can reset
the setting.
MENU : You can memorise adjusted picture or sound.
TV Add/Delete
... ... More
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
† † More
Move Enter Return
Fine Tune
P 1 0
Reset
Move
Adjust Return