Viewing The Menus; Channel - Sort - Samsung CS29Z45 Owner's Instructions Manual

Viewing the Menus

1 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon's sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
(depending on the model)
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1 If the television is in standby
mode, press the POWER
button on the remote control.
The Start Plug & Play is
displayed. To start Plug
& Play, press the ENTER
button. The Language
menu is displayed.
The Language menu
➢
will automatically appear
after several seconds,
even if the ENTER
button is not pressed.
2 Select the appropriated
language by pressing the
▲ or ▼ button. Press the
ENTER button. The Check
antenna input. is displayed.
If any language is not selected, the language menu
➢
will disappear about 30 seconds later.
AA68-04048J-Eng.indd 3
All manuals and user guides at all-guides.com
3 To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
4 Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
5 When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Re-setting the Plug & Play
Method:
MENU ➜ ▲/▼ (Setup) ➜
ENTER ➜ ▲/▼ (Plug & Play)
➜ ENTER
Plug & Play
Start Plug & Play.
OK
Enter Exit
Plug & Play
Input - Source List
Language
English
Indonesia
Melayu
◆ Source List
Move Enter Skip
You can switch between
viewing signal from
connected equipment,
such as a VCR, DVD, set-
Plug & Play
top box, and the TV source
Check antenna input.
(broadcast or cable).
OK
Enter Skip
➢
continued...
Plug & Play
Auto Store
Start
Enter
Plug & Play
Auto Store
P 1
Stop
Enter
Plug & Play
Clock Set
Move
Adjust
Enjoy your watching.
OK
TV
Plug & Play
Language : English
Time
Child Lock
Blue Screen
Move Enter
(depending on the model)
TV
TV
AV1
AV2
Component
Move Enter
You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the SOURCE button on the remote control.
English - 3
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Skip
To stop the search before it has finished, press the
➢
ENTER button.
102MHz
When finished, the Sort menu
7 %
is displayed. To sort the stored
channels into the desired
numerical order, refer to
Skip
"Channel - Sort". To exit without
sorting, press the EXIT button.
1 2 : 0 0 am
Enter
Skip
Setup



Channel - Sort



: On

This operation allows you to
change the programme numbers
Return
of stored channels. This
operation may be necessary
after using auto store.
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
Source List
Return
Search
P 1 102MHz
7 %
Stop
Enter Return
Sort
TV
From : P 1
To : P--
Store : ?
Adjust
Move Return
2009-12-07 6:2