Colour Television; Connection Panel; Control Panel - Samsung CS29Z45Z39 Owner's Instructions Manual

COLOUR TELEVISION

Owner's Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register

Control Panel

(depending on the model)
➢
The actual configuration of your TV may be different,
depending on your model.
Front (or Side) Panel
1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator
6 Power on/off
◆ You can use the 3 buttons to switch the TV on when it is
in standby mode depending on the model.
◆ The 2 and 3 buttons also have the same function as the
œ/√/†/... buttons on the remote control.
◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.

Connection Panel

(depending on the model)
➢
The actual configuration of your TV may be different,
depending on your model.
Rear Panel
COMPONENT IN
(480i/480p/576i/576p/
720p/1080i/1080p)
Y
P
B
P
R
L
I
AUDIO
I
R
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the colour coded input
terminals and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The ´, 3 SCART connectors are used for equipment, such
as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player.
The RCA4 connectors are used for equipment such as a
DVD with component output.
English - 2
Front (or Side) Panel
or
cable
television
network
☛
Please be sure to match the colour coded input
terminals and cable jacks.
Connecting to the RCA Input
The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used
for equipment, such as a camcorder, video player, or video
or
game device.
cable
television
Connecting to the S-Video Input
network
The 1 (S-VIDEO input) and 2 (VIDEO input) connectors
are used for equipment with an S-Video output, such as a
camcorder or VCR.
➢
When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
continued...
ΠS-Video input
´ Video input
ˇ Audio input