Using Group Call - Nortel 1220 User Manual

Operating your IP Phone 1220
(Goodbye)

Using Group Call

Use the Group Call feature to automatically call members of a predefined
group, one at a time, until all members answer.
Calling group members
Use the following procedure to call group members.
GrpCl
122
3. For a single conferee, press the
Goodbye key. If configured, the
Conference Count Display
updated total count of conferees. The
LCD indicator turns off.
For multiple conferees, repeat steps 1
and 2 until all conferees are
disconnected. Then press the
key.
1. Lift the handset.
2. Press the GrpCl
Call FFC.
The feature automatically calls all group
members. The icon flashes until all
members answer. The phone numbers
of the group members appear on the
display as they answer. When the last
person answers, the
lights steadily.
Note: When a person in your group is on
a conference call or another group call,
they are not connected to your group
call.
returns an
or
Goodbye
key or enter the Group
Group Call icon