Managing Multiparty Calls; Using Call Join - Nortel 1220 User Manual

Managing multiparty calls

Use the following features to enable multiparty conversations:
• "Using Call Join" on page 119
• "Setting up a Conference Call" on page 119
• "Using Conferee Selectable Display" on page 120
• "Using Group Call" on page 122

Using Call Join

Use the Call Join feature to connect a new caller to an active call. This
connection creates a conference (conversation involving more than two
parties) between the two callers and yourself.
Conf
Conf
Setting up a Conference Call
Use the Conference feature to initiate a conference call for a group of
three to six people including yourself. The maximum number of people
supported in a conference call depends on the IP Phone configuration.
Conf
Operating your IP Phone 1220
1. To connect a call on hold to your current
call, press the
2. Press the line key of the caller you want
to connect to your current call.
3. Press the Conf
person on hold to your conversation.
1. During a call, press the
to place the party on hold.
You hear a dial tone.
Conf soft key.
soft key again to join the
Conference key
119