Recording A Calling Party (Caller) Number - Nortel 1220 User Manual

Operating your IP Phone 1220
Note: When Call Park is configured network-wide, you can use this
feature across networks. You can configure a System Park extension
to automatically park most calls.
Park

Recording a Calling Party (Caller) Number

During a call use the Calling Party Number feature to record the calling
party number, or to charge the call to an account number.
CParty
CParty
112
1. Lift the handset.
2. Press the Park
3. Dial the DN where you parked the call.
If a parked call is not retrieved within a
specific time, it rings back to your IP
Phone or to the attendant.
1. Press the CParty
The caller is placed on hold.
2. Dial a charge account number or the
caller number.
Note: For information about using the
Charge soft key, see
Transfer" on page
3. Press the Call Party
the call.
soft key.
soft key.
"Using AutoDial
140.
soft key to return to