Heath Zenith 598-1215-01 Owner's Manual page 6

attaCHing tuBEs tO CHiME
attach spring Hangers to Brass tubes
1. Locate the drilled holes in one end of each tube (see Figure 5).
2. Insert one end of spring hanger into one hole.
3. Compress the hanger just enough to insert the other end into
the second hole.
Hang Brass tubes in Chime
1. Insert tubes through opening in the bottom of the chime (see
Figure 6).
2. Hang the tubes on the hanging brackets using the spring hangers
installed above.
Note: Make sure the spring hanger is securely seated in the notch
on the hanging bracket.
-6-
Spring Hanger
Compress
Figure 5 - Attaching Spring Hangers to Brass Tubes
Hanging Bracket
Spring Hanger
Figure 6 - Hanging Brass Tubes in Chime
598-1215-01
Brass Chime Tube