Using Other Nozzles (Accessories) - Dirt Devil Vision V1 Operating Manual

2 Unpacking and connecting
2.3 Using other nozzles
(accessories)
1
2
1
3
2
Your can expand the scope of functions of the brush
vacuum cleaner with other nozzles.
„
The crevice nozzle (Fig. 4/3) and the 2-in-1 combi-
1
nozzle (Fig. 4/1) are included as accessories in the scope
of delivery. They can be secured to the accessories mount
(Fig. 4/2).
2
- Crevice nozzle (Fig. 4/3)
Use this to vacuum dust from hard to reach places.
3
- 2-in-1 combi-nozzle (Fig. 4/1) to be used as:
Furniture brush (Fig. 5/1)
Fig.4
Use this to vacuum dust off objects that have
sensitive surfaces (e.g. cupboards, doors).
Upholstery nozzle (Fig. 5/3)
By simply pushing off the brush attachment (Fig. 5/2)
you can make an upholstery brush (Fig. 5/3) from the
2-in-1 combi-nozzle. Use this to clean soft, scratch-
3
resistant surfaces (e.g. upholstered furniture).
„
The following is also available as an option:
- Mini-turbo brush (optional) (Fig. 6)
Fig.5
This has a rotating brush head. It is particularly suited
for deep cleaning of small areas (e.g. stairs,
upholstered furniture).
WARNING:
Only assemble the nozzles if the plug has been removed
from the socket. The brush vacuum cleaner could be
switched on by accident.
Fig.6
WARNING:
The brushing roller is in motion when the appliance is
switched on. In order to avoid injuries, position the
appliance so it is upright, move the handle forwards until
it audibly clicks into place and turn the pile depth
adjustment (Fig. 14/2) to the left it you want to work with
the accessory nozzles (idle running mode).
Proceed as follows to attach the nozzles:
Fig.7
1. Switch the appliance off and pull the plug out of the
socket.
2. Put the appliance into idle running mode ZPage 31,
"Storage", Point 3.
1
3. Push the button to release the telescopic tube (Fig. 7/2)
and pull the telescopic tube (Fig. 7/1) out of the
telescopic tube mount (Fig. 7/3).
4. Pull the flexible suction hose out of the suction hose
Fig.8
mount (Fig. 8/1).
27