Using Other Nozzles (Accessories) - Dirt Devil Bagline M7020 Operating Manual

2 Unpacking and assembly
3
2
1
2.3 Using other nozzles
(accessories)
1
2
5. Push the accessories mount (Fig. 5/1) onto the
telescopic tube (Fig. 5/2) below the telescopic tube
4
lock. Then push the furniture brush (Fig. 5/3), crevice
5
nozzle (Fig. 5/4) and upholstery nozzle (Fig. 5/5) onto
the holders.
Your cylinder vacuum cleaner is now ready to use.
Fig.5
Together with the floor nozzle just assembled, you can
expand the range of functions of your cylinder vacuum
cleaner with other nozzles.
The crevice nozzle, the furniture brush and the
upholstery nozzle are included as accessories in the
scope of delivery. They can be secured to the accessories
mount (Fig. 5/1) when not in use.
- Crevice nozzle (Fig. 6/1)
3
Use this to vacuum dust from hard to reach places.
- Furniture brush (Fig. 6/2)
Use this to vacuum dust off objects that have
sensitive surfaces (e. g. cupboards, tables).
- Upholstery nozzle (Fig. 6/3)
Use this to clean soft, scratch-resistant surfaces (e. g.
Fig.6
upholstered furniture).
Also available as an option are the following:
- Turbo brush (Fig. 7)
This has a rotating brush head and is therefore best
suited for deep-cleaning carpets. Brushing also
causes the carpet pile to straighten up.
NOTE:
When using the turbo brush, a loud noise can occur as a
result of the high speed of the brush.
Fig.7
- Parquet brush (Fig. 8)
This is equipped with long bristles and is used for
vacuuming particularly sensitive surfaces (e. g.
parquet, laminate flooring).
WARNING:
Only assemble the nozzles if the plug has been removed
from the socket. The appliance could be switched on by
accident.
Fig.8
25