Scanning; Tips For Scanning; Scanning To A Local Computer; Scanning To A Flash Drive Or Memory Card - Lexmark S310 Series Quick Reference Manual

October 2012
Hide thumbs Also See for S310 Series:
Table of Contents

Advertisement

Scanning

Scanning
Scanner glass
Load the original document facedown at the placement corner.
Note: The automatic document feeder (ADF) is available only in select printer models.

Tips for scanning

Load the original document facedown on the scanner glass. You can load postcards, photos, small
items, transparencies, photo paper, or thin media (such as magazine clippings).
Close the scanner cover, if possible, to avoid dark edges on the scanned image.
Make sure the paper exit tray is fully extended, and the tray extension is flipped out.
When the document to be scanned is in place with the settings you want, press

Scanning to a local computer

1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel, navigate to:
> Scan >
OK
> Computer > USB‑Connected Computer >
The USB‑connected computer will receive the scan by default.
Note: Make sure the scan software is installed on the destination computer.
to start scanning.
OK
3
Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
you make a selection.
4
Press
.

Scanning to a flash drive or memory card

Notes:
Some features are available only in select printer models.
Make sure your flash drive or memory card is not write‑protected.
1
Load the original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel navigate to:
> Scan >
OK
> Memory Device
3
Insert the flash drive or memory card, and then press
Note: The printer reads only one memory device at a time.
4
Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
Set the color, quality, original image size, and other scan options. If necessary, press
you make a selection.
5
Press
.
Follow the instructions on the printer display.
Scanning directly to e‑mail using the printer software
Make sure you have set up your e‑mail settings before proceeding. For more information, see the section
on e‑mailing in the User's Guide.
For Windows users
1
Load an original document faceup into the ADF or facedown on the scanner glass.
2
From the computer, do the following:
In Windows 8
From the Search charm, type Printer Home, and then navigate to:
Printer Home > select your printer > Scan
24
OK
each time
.
OK
OK
each time

Advertisement

Table of Contents
loading

Table of Contents