Table of Contents
Advertisement
About your printer
Use
To
9
Cancel
•
Cancel a print, copy, or scan job in progress.
•
Clear current settings or error messages, and return to previous
settings.
10
Wi‑Fi indicator
Check the wireless status of your printer.
11
Eco‑Mode
•
Change to Sleep mode after the printer is left idle for 10 minutes.
•
Reduce the screen brightness.
12
Back
•
Return to the previous screen.
•
Exit from one menu level to a higher one.
Using flash drives
Supported file types
•
.jpg, .jpeg, .jpe (Joint Photographic Experts Group)
•
.tiff, .tif (Tagged Image File Format)
Using a flash drive with the printer
Make sure the flash drive contains files that are supported by the printer. For more information, see
"Supported file types" on page 13.
1
Insert a flash drive into the USB port.
Notes:
•
The flash drive uses the same port that is used for a PictBridge camera cable.
•
An adapter may be necessary if your flash drive does not fit directly into the port.
2
Follow the instructions or select from available options on the printer display.
Note: If the printer does not recognize the memory device, then remove and reinsert it.
Warning—Potential Damage: Do not touch any cables,
any network adapter, any connector, the memory
device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A
loss of data can occur.
13
Advertisement
Table of Contents
Troubleshooting
