Appendix B: Safety And Regulatory Information; Important Safety Information - Kodak D4000 User Giude

Appendix B: Safety and Regulatory

Important Safety Information

Information
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified in this manual may result in injury
and/or damage to the printer.
• The power outlet should be easily accessible and installed near
the printer.
• Position the power cable so that it cannot be pulled on or tripped
over.
• Never allow the power cable to contact hot surfaces.
• The power outlet must be grounded. An ungrounded outlet can
cause fire, electric shock or harmful interference to nearby
electrical devices.
• Only use the power cable provided with the printer.
• Do not operate the printer with a damaged power cable.
• Always unplug the power cable from the printer before cleaning
or when the printer is not in use.
• If the printer has been dropped or damaged, make sure a qualified
service person examines the printer before you use it.
• Do not block the filter openings on the printer cabinet.
• Do not expose the printer to moisture or water.
• Do not allow any foreign objects or liquids to fall or spill inside
the printer. Fire or electric shock could result.
• The thermal print head becomes extremely hot during normal
operation. Do not touch it.
• Alcohol pads are used to clean the thermal print head and other
internal printer components. Consult the manufacturer's Material
Safety Data Sheet prior to use.
In the United States, for information on health-related issues,
call 585-722-5151. For environmental issues related to Kodak
products, contact Kodak on 1-800-242-2424. Customers outside
the U.S. can contact KODAK Service and Support.
B-1