Kodak D4000 User Giude page 33

Message Description or Cause
Paper Cover Open The paper holder is open.
Incorrect Rib L The printer could not read the bar code
on the ribbon on the left, or the wrong
type is loaded.
Incorrect Rib R The printer could not read the bar code
on the ribbon on the right, or the wrong
type is loaded.
Ribbon Mismatch The ribbons loaded on the left and the
right are not the same size.
Ribbon Empty L The ribbon on the left is empty.
Ribbon Empty R The ribbon on the right is empty.
Paper Empty The paper is empty or is not loaded
correctly. Automatic loading failed.
Load Paper The paper is empty or is not loaded
correctly.
Take Out Paper The printer detected the end of the paper
and ejected the remainder of the paper.
Ready Loading The printer is preparing to load paper.
Control Error The printer has a specific problem that
may require service.
Mecha Error
Sensor Error
TempSensErr
Upper L Jam The paper is jammed on the left side of
the upper paper path.
Upper R Jam The paper is jammed on the right side of
the upper paper path.
Lower Jam The paper is jammed in the lower paper
path.
Possible Solution
Securely close the paper holder.
Check that the ribbon on the left has a bar
code, and/or replace it with the correct type
(see page 1-7).
Check that the ribbon on the right has a bar
code, and/or replace it with the correct type
(see page 1-7).
Load ribbons that are the same size
(see page 1-7).
Load (or reload) the ribbon on the left
(see page 1-7).
Load (or reload) the ribbon on the right
(see page 1-7).
Load (or reload) the paper
Load (or reload) the paper
Load new paper (see page
No action is necessary.
Turn the printer off. After 10 or more seconds,
turn the printer on and wait for it to warm up.
If the error persists, contact KODAK Service
and Support. Have available:
• error code number.
• printer model number and serial number
(shown on the data plate on the back of
the printer).
Clear the paper jam from the upper paper
path (see page 4-4), then reload the paper.
If the error persists, turn the printer off and
then on again.
Clear the paper jam from the lower paper
path (see p age 4-6), and then reload the
paper. If the error persists, turn the printer off
and then on again.
Troubleshooting
(see page 1-4).
(see page 1-4).
1-4).
4-3