Table of Contents
Advertisement
Setting Up the Printer
1-8
3. Rotate the thermal head release lever on the left side (labelled
L1) or the right side (labelled R1) down to the unlocked position.
4. If you are:
• loading the ribbon for the first time, go to
• replacing the ribbon, continue with the next step.
5. Slide the cassette release lever on the left side (labelled L2) or
the right side (labelled R2) to the unlocked position. Pull the
cassette slightly forward.
6. Pull the handle to remove the cassette. Support the cassette
with two hands.
7. Place the cassette onto a flat surface with the handle towards
you.
8. If necessary, repeat
other side.
Images remain on the ribbon after printing. Maintain
IMPORTANT:
confidentiality.
9. Remove the used ribbon from each cassette and dispose of the
used ribbon appropriately.
steps 3
-
7
to remove the cassette on the
step
10.
Hide quick links:
Advertisement
Table of Contents
