Connecting The System To A Phone Line - Radio Shack 14 Minute Owner's Manual

3. Replace the cover and secure it
with the screw.
4. Replace the battery when
appears on the display. Unplug the
AC adapter and disconnect the
phone from the phone line before
replacing the battery. After
installing the new battery,
reconnect to AC power and the
phone line. ± ± ± ±
% "
100'%6+0) 6*'
" "2 ".
61 # *10' +0'
Select a location near a telephone jack,
an easily accessible AC outlet, and out
of the way of normal activities. You
must use compatible modular jacks that
are compliant with Part 68 of FCC
Rules and the requirements adopted by
the ACTA. The telephone cord and
modular plug provided is Part 68
compliant for connecting to the
telephone company network. If your
home has specially wired alarm
equipment connected to the telephone
line, be sure that installing the system
does not disable your alarm equipment.
If you have questions about what will
disable your alarm equipment, contact
your telephone company or a qualified
± ± ±
installer.±
± ±
± ±
$#66'4;"016'5"
• Listen to new
Beý Beý Beý Beý
messages before
replacing the battery,
since removing the
battery erases all
messages.
• You must reset the
clock after replacing
the battery.
• Dispose of old
batteries promptly and
"5 "
;56'/
properly. Do not burn
or bury batteries.
• Use only a fresh
battery of the required
size and
recommended type.
• If you do not plan to
use the system for a
month or longer,
remove the battery.
Batteries can leak
chemicals that can
destroy electronic
parts.
Connecting the
System to a Phone
Line
The USOC number of the
jack to be installed is
RJ11C (or RJ11W for a
wall plate jack).
± ±
± ±
"
5