Connecting To The Telephone Line - Radio Shack TAD-799 Owner's Manual

43-799.fm Page 7 Monday, August 16, 1999 9:43 AM
2. Snap the battery's terminals to the
connector inside the compartment.
3. Replace the cover.
When Lo and the two-digit number of
calls in memory alternately flash on the
display, replace the battery. When you
replace the battery, be sure the TAD is
connected to AC power so you do not
lose any stored information.
Cautions:
• Dispose of old batteries promptly
and properly. Do not burn or bury
them.
• Always remove old or weak batter-
ies. Batteries can leak chemicals
that can destroy electronic parts.
CONNECTING TO THE
TELEPHONE LINE
To connect the TAD to the phone line,
plug one end of the supplied modular
cord into the
TEL LINE
of the TAD. Then plug the other end into
a modular phone jack.
You can also connect a telephone to the
jack on the back of the TAD us-
TEL SET
ing a second modular cord (not sup-
plied).
jack on the back
7