Table of Contents
Advertisement
Using Bluetooth
Preparing the phone
To be able to use the Konftel 60W with your
phone, you need to add it to the list of devices
(also called 'pairing'). The Konftel 60W can
store up to 8 phones.
To achieve optimal performance, the distance
between the Konftel 60W and the phone should
not exceed 5 meters.
Add your phone and remove other stored phones
Hold the Tuning button (trim) for up to 2
seconds for the headset profile/4 seconds for
2 sec/4 sec.
the handsfree profile until the blue indicator
lights start flashing. Set your telephone accord-
ing to the instructions for adding a Bluetooth
device as described in the phone user guide.
Select the Konftel 60W from the list of devices.
Enter the passkey "0000".
If pairing is successful, you will hear a short
tone and the indicator lights will stop flashing.
Add your phone and keep other stored phones
and
Hold the Tuning button (trim) for up to 2 seconds
until the blue indicator lights start flashing.
2 sec.
Resetting the Konftel 60W
and
To remove all pairing information and restore de-
fault settings, hold - and + buttons simultaneously
2 sec.
for up to 2 seconds until you hear a short beep.
Ring signal
Press the - button for up to 2 seconds to turn
on/off the ring signal for incoming calls. Default
2 sec.
setting ring signal off. The indicators light up to
indicate an incoming call.
3
Advertisement
Table of Contents
