Using A Computer; Using A Mobile Phone - Konftel 300W Quick Reference Manual

REGISTRATION
Line mode
DECT connection is the
pre-programmed option,
but it is possible to switch
between and combine two
connectivity options. To do
this, press the LINE MODE
key, select a connectivity
option and press OK to
confirm your choice.
You can add another
line, end a line or switch
between connected lines
during a call.
• lINE mOdE
BASE StAtION REgIStRAtION
 Put the base station in registration mode.
 Select MENU > SEttINgS > DECt >
REgIStER.
 Select a base (1–4).

Enter the base station's PIN code.
 The default code is 0000 for the Konftel
DECT base station.

Enter the PARK code if this is required.
Otherwise, leave blank.

Some DECT systems require a PARK
code. (Not necessary with Konftel's
base.)
The conference telephone will now search
for a base station. The base station has to
be in registration mode. If registration was
successful, the word READY will appear in the
display.
 You can give the base station an appro-
priate name, if you wish.
The conference phone is now ready to use
Mini USB port for PC
connection

USINg A COMPUtER

 Connect the Konftel 300W to a compu-
ter using the USB cable provided.
 Select Konftel 300W Audio as the
sound unit in the computer's settings.

Press the LINE MODE key. Select USB
and press OK to confirm.
Making voIP calls
 Press to activate the microphone in
the Konftel 300W.
 Connect the call to the computer using,
for example, web conference software or
Skype .
®

USINg A MOBILE PHONE

 Connect a mobile phone using an acces-
sory cable.
 Press the LINE MODE key. Select
MOBILE and press OK to confirm.
Making mobile calls

Press to activate the Konftel 300W.

Connect the call with the mobile phone.