Table of Contents
Advertisement
Attaching a HumidAire 2i Humidifier
Please refer to the illustrations in section E of the illustration sheet.
The
HumidAire 2i
humidification. No other accessories are required for its use. The VPAP
automatically detects the presence of the
are required. Please refer to the HumidAire 2i User's Manual for details.
Attaching a HumidAire 2iC Humidifier
Please refer to the illustrations in section F of the illustration sheet.
The HumidAire 2iC attaches to the front of a VPAP unit to provide passover
humidification. No other accessories are required for its use. Please refer to
the HumidAire 2iC User's Manual for details.
Note: You must activate the humidifier option in the menus if you are using
a HumidAire, HumidAire 2iC or Passover humidifier.
Attaching a HumidAire Humidifier
Please refer to the illustrations in section G of the illustration sheet.
Medium size (52 cm) air tubing is a necessary accessory for connecting the
VPAP unit to the HumidAire humidifier.
To set up the VPAP with the
1. Fill the HumidAire with water as described in the humidifier manual.
2. Place the filled water chamber inside the HumidAire. Connect the
medium (52 cm) air tubing to the right connector port, and the long air
tubing (2 m or 3 m) to the left connector port on the humidifier (G-1).
Close the HumidAire lid.
3. Place the VPAP on top of the HumidAire (G-2). Do not place the VPAP
unit underneath the humidifier. (This is to avoid water spilling into the
unit.)
4. Connect the free end of the medium air tubing to the air outlet of the
VPAP (G-3).
5. Connect the mask system to the free end of the long air tubing. The final
assembly should look like figure G-4.
6. Plug the
7. If the VPAP is not already plugged in, see Step 2 on page 7.
WARNING
!
Make sure that the power cord and plug are in good condition and the
equipment is not damaged.
8. Navigate to the humidifier setting (if available) in the VPAP menu and
select "HUMIDAIRE". See "How to Use the Detailed Menu (if enabled by
your clinician)" on page 20.
8
attaches to the front of the VPAP to provide heated
HumidAire
power cord into a power outlet.
HumidAire
. No menu changes
HumidAire 2i
:
Hide quick links:
Advertisement
Table of Contents
