Humidifiers; Accessories - ResMed VPAP III User Manual

Notes:
ResMed VPAP devices have been designed and manufactured to provide
•
optimum performance using ResMed vented mask systems. While other
vented mask systems may be used, performance and data outputs may
be affected. To select an appropriate setting for another mask system,
find the closest match to a ResMed mask in Table 3 on page 23.
Not all masks are available in all regions.
•

Humidifiers

Please refer to the illustrations in section B of the illustration sheet.
A humidifier may be required if you are experiencing dryness of the nose,
throat or mouth. The VPAP is compatible for use with the following
humidifiers:
HumidAire 2i™ heated humidifier (B-1)
•
HumidAire 2iC™ passover humidifier (B-2)
•
HumidAire™ heated humidifier (B-3)
•
ResMed Passover humidifier (B-4).
•
WARNING
!
Only the HumidAire 2i, HumidAire 2iC, HumidAire heated humidifier
and the ResMed Passover are compatible for use with the VPAP. Please
refer to Warnings on page 2.

Accessories

Please refer to the illustrations in section C of the illustration sheet.
The following accessories may be purchased separately:
3 m air tubing (C-1)
•
Medium (52 cm) air tubing for the HumidAire and ResMed Passover
•
humidifiers (C-2).
Note: ResMed regularly releases new products. Please check our website
at <www.resmed.com>.
6