Select Options - White Rodgers NP100 Installation Instructions & User Manual

3.2 Select options

Set SYSTEM switch to OFF position and then press both
simultaneously.
You will be prompted to answer 5 "Options" questions, on page 15.
As each option is presented:
✔ Use the
buttons to answer each question.
✔ Then press both
buttons simultaneously
to move to the next question.
buttons
14
Options Default Setting Additional Information
1. Do you want the FA
Cycle Rate to be (fast)
Fast or Slow?
2. Do you want 000
to be reminded (no reminder)
when it is time
to change the
air fi lter? (FILTER)
3. Compressor OFF
Lockout (LOC)
4. How much 0HI (no offset)
displayed
temperature offset
do you want?
5. Do you want °F
temperature (Fahrenheit)
displayed in °C
(Celsius) or °F
(Fahrenheit)?
When you have answered all 5 questions, set SYSTEM switch to
HEAT position.
Select SL (slow) if you have
Hydronic (water or steam)
heating. Otherwise, select
default FA.
Select default 000 for now.
To set a fi lter-change
reminder, see section 4.1
Select ON to provide
protection to your Heating
and Cooling System's
compressor
Select default 0HI for now.
To adjust the actual
temperature reading, see
section 4.3
15