Select Options; Turn On Power To Your Heating And Cooling System - White Rodgers UNP300 Installation Instructions & User Manual

3.3 Select options

Press the MENU button and, using the
MORE OPTIONS is fl ashing. Press OK.
You will be prompted to answer 5 "Options" questions.
• Use buttons to answer each question.
• Use buttons to advance to the next question.
Navigation Buttons
Options Default Setting Additional Information
1. Do you want ON
to be reminded (13 weeks)
when it is time to
change the air fi lter?
2. Do you have a OFF
Heat Pump? (no Heat Pump)
To determine if you have a Heat Pump and/or whether it is a
1-stage or 2-stage model, see the Appendix at the end of manual.
buttons, scroll down until
Select default ON for now.
To modify a fi lter-change
reminder, see Additional
Features section 4.5.
If you do not have a Heat
Pump, select OFF.
If you do have a Heat Pump,
use the buttons
to select (On1) for a 1-stage
or (On2) for a 2-stage
Heat Pump.
16
Options Default Setting Additional Information
3. Do you want the FA
Cycle Rate to be (fast)
Fast or Slow?
4. Do you want °F
temperature (Fahrenheit)
displayed in °C
(Celsius) or °F
(Fahrenheit)?
5. How much 0 (no offset)
displayed
temperature offset
do you want?
When you have answered all 5 questions, press the DONE button.
3.4 Turn on power to your heating and
cooling system.
Congratulations!
You have completed the basic setup of
your new thermostat. It's ready to use.
To read about additional thermostat features, continue to section 4.
Select SL (slow) if you
have Hydronic (water
or steam) Heating.
Otherwise, use default FA.
Select default 0 for now.
To adjust the displayed
temperature reading, see
Additional Features
section 4.6
17