Siemens Advance Network Gateway User Manual page 21

Pre Installation Planning,
Figure 2-3. ANG_EN Fiber
Optics Installation
2000590-001
Continued
Figure 2-3 shows an ANG_EN in a 10BASE-T to fiber optic installation. Fiber
optic equipment including converters, hubs and interconnecting cable are not
provided by Siemens Applied Automation.
As shown in Figure 2-3. multiple ANG_EN's may be interconnected into a
single large system by using appropriate Ethernet hubs.
The APC (Advance Personal Computer) must be connected to a standard
segment of Advance Data Hiway via the Advance Personal Computer Inter-
face (PCI).
Analyzer House
Advance Hiway Data
ANG
GC GC
FIBER
Distant
OPTICS
Analyzer House CONVERTER
Advance Data Hiway
ANG
GC GC
FIBER OPTICS
CONVERTER
FIBER
OPTICS HUB
ANG
STP (10BaseT)
from each
Gateway to
fiber optic hubs
or converters
Control Room
I/O Unit
Advance Data Hiway
PC-1
APC
Installation 13