Dish Network DP512 User Manual page 84

Chapter 3
Using the System
Tip: The IR remote
control is used to
control the menus
and programming
on the nearby TV.
An optional IR/UHF
Pro remote control
can be used to
control the menus
from another room
Page 78
Creating or Changing Channel Locks
You can lock any channel, including pay-per-view channels.
1. Press the
Menu
2. Select the
Locks
3. If the receiver is locked, then enter the password using the NUMBER PAD
buttons. The receiver displays stars (*) as you enter the digits of the
password. When you enter the fourth digit of the password, the receiver
highlights the
OK
4. Select the
Channel Locks
5. Highlight the channel that you want to lock. If necessary, press the UP or
DOWN ARROW button to see the channel. You can also jump to a channel
by typing the channel number using the NUMBER PAD buttons.
6. Press the SELECT button to lock or unlock the highlighted channel. If the
checkbox next to the channel has a checkmark, then the channel is locked.
7. Select the
Done
8. If the receiver is not already locked, then you must lock it to put the locks
you just created into effect.
Locking and Unlocking the Receiver Front Panel
This keeps anyone from using the front panel buttons, but it does not lock the
remote control buttons. This option is only available on TV1 menus.
1. Press the MENU button.
2. Select the
Locks
3. If the receiver is locked, enter the numeric password using the NUMBER
PAD buttons. The receiver displays stars (*) as you enter the digits of the
password. As soon as you enter the fourth digit of the password, the receiver
highlights the
OK
button.
option.
option. Press the SELECT button.
option.
option to save your changes.
option.
option. Press the SELECT button.