Chapter 2 - Receiver Description And Installation; Receiver Front Panel - Dish Network DP512 User Manual

Chapter 2
Receiver Description and Installation

Receiver Front Panel

Smart Card Door
Behind this door is a slot for insertion of a smart card. A smart card, if one is
included with your receiver, is required to access your programming services.
Arrow Buttons
You can use the ARROW buttons to change satellite channels displayed on your
TV. From within a menu, use these buttons to move the on-screen highlight up
or down.
Indicators
• —The green light indicates that the receiver is providing
TV1 Power
programming to your TV through the rear-panel
• —The red light indicates that the DVR is recording an event.
Recording
Buttons
The buttons on the receiver give you some control of the receiver. However,
most of the time you will want to use the remote control that came with your
receiver.
• —Displays the receiver's
System Info
• —Displays the
Menu
ARROWS and the SELECT button to navigate through the menus.
•
Arrows/Select
the ARROWS and SELECT button on the remote control.
• —Press the POWER button to turn on satellite programming to your
Power
TV, or to turn it off (that is, to place the receiver in standby mode) if it's on.
IR Sensor
The INFRARED (IR) SENSOR receives IR signals from the remote control.
. After you press this button, use the
Main Menu
—Use the ARROWS and SELECT button the same way as
output connections.
TV1
screen on your TV.
System Info
Page 19