Table of Contents
Advertisement
11.
From the workstation, open the command window by clicking the Start button and selecting Run.
12.
Type CMD to open the command window. Click OK.
13.
When the command window opens, type IPCONFIG /RELEASE to release your current IP received
from the router.
14.
Then type IPCONFIG /RENEW to renew your IP address from the router. You should also receive a
DNS addresses from the router.
15.
Close the command window.
16.
Open a Web browser. You are now connected to the Internet.
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375E)
Chapter 2 – Getting Started
19
Advertisement
Table of Contents
