Wireless Statistics - TP-Link TL-WR641G User Manual

Note:
1 If you select the radio button Allow the stations not specified by any enabled entries in
the list to access for Filtering Rules, the wireless station B will still not be able to access
the router, however, other wireless stations that are not in the list will be able to access the
router.
2 If you enable the function and select the Deny the stations not specified by any enabled
entries in the list to access for Filtering Rules, and there are not any enable entries in the
list, thus, no wireless stations can access the router.

4.5.3 Wireless Statistics

This page shows MAC Address, Current Status, Received Packets and Sent Packets for
each connected wireless station.
1. MAC Address - The connected wireless station's MAC address
2. Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / AP-UP / WPA / WPA-PSK /WPA2/WPA2-PSK/None
3. Received Packets - Packets received by the station
4. Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go
to the next page and click the Previous button to return the previous page.
Note:
This page will be refreshed automatically every 5 seconds.
TL-WR641G 108M Wireless Router User Guide
Figure 4-21
Figure 4-22
- 36 -