TP-Link TL-WR641G User Manual page 32

User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Dynamic IP/ Static IP – Choose either as you are given by your ISP.
Click the Connect button to connect immediately. Click the Disconnect button to
disconnect immediately.
Connect on Demand - You can configure the router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet connection
has been terminated due to inactivity, Connect on Demand enables the router to
automatically re-establish your connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the radio button. If you want your
Internet connection to remain active at all times, enter 0 in the Max Idle Time field.
Otherwise, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Note:
Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time,
since some applications is visiting the Internet continually in the background.
Connect Automatically - Connect automatically after the router is disconnected. To use
this option, click the radio button.
Connect Manually - You can configure the router to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the router will disconnect
from your Internet connection, and you will not be able to re-establish your connection
automatically as soon as you attempt to access the Internet again. To use this option, click
the radio button. If you want your Internet connection to remain active at all times, enter "0"
in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have
the Internet connecting last unless a new link is requested.
Note:
Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time,
since some applications is visiting the Internet continually in the background.
8. If you choose PPTP, you should enter the following parameters (Figure 4-12):
TL-WR641G 108M Wireless Router User Guide
- 25 -