TP-Link TL-WR641G User Manual page 42

To modify or delete an existing entry:
1) Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2) Modify the information.
3) Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
Click the Next button to go to the next page and click the Previous button to return to the
previous page.
For example: If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be
able to access the router. The wireless station B with MAC address 00-0A-EB- 00-07-5F not be
able to access the router, and the wireless station C with MAC address 00-0A-EB-00-07-8A be
able to access the router when its WEP key is 2F34D20BE2E 54B326C5476586A, while all other
wireless stations cannot access the router, you should configure the Wireless MAC Address
Filtering list by following these steps:
Click the Enable button to enable this function.
Select the radio button: Deny the stations not specified by any enabled entries in the
list to access for Filtering Rules.
Delete all or disable all entries if there are any entries already.
Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC
Address field, enter wireless station A in the Description field, select Allow in the
Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and
the Return button.
Click the Add New... button and enter the MAC address 00-0A-EB-00-07-5F in the MAC
Address field, enter wireless station B in the Description field, select Deny in the
Privilege pull-down list and select Enabled in the Status pull-down list. Click the Save and
the Return button.
Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A in the MAC
Address field, enter wireless station C in the Description field, select 128-bit in the
Privilege pull-down list, enter 2F34D20BE2E54B326C5476586A in the WEP Key field and
select Enabled in the Status pull-down list. Click the Save and the Return button.
The filtering rules that configured should be similar to the following list:
TL-WR641G 108M Wireless Router User Guide
- 35 -