Table of Contents
Advertisement
To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up an IP
Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on the Firewall
page, and click the Add New... button. The page "Add or Modify an IP Address Filtering
entry" will appear shown in Figure 4-38:
To create or modify an IP Address Filtering entry, please follow these instructions:
1.
Effective Time - Enter a range of time in HHMM format, which point to the range time for
the entry to take effect. For example, 0803 - 1705, the entry will take effect from 08:03 to
17:05.
2.
LAN IP Address - Enter a LAN IP Address or a range of LAN IP addresses in the field, in
dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field
open, which means all LAN IP Addresses have been put into the field.
3.
LAN Port -Enter a LAN Port or a range of LAN ports in the field. For example, 1030 - 2000.
Keep the field open, which means all LAN ports have been put into the field.
TL-WR641G
108M Wireless Router User Guide
Figure 4-37
Figure 4-38
- 47 -
Advertisement
Table of Contents
