Table of Contents
Advertisement
The Set values are:
Set 1
-
[0–31] and [128–159] specify control codes
(Factory Default Setting).
Set 2
-
[03–06], 21 and [128–159] specify printable characters.
Note:
The PC Table may be set such that a range of ASCII characters in the
code page are interpreted.
The Font (quality) values are:
DRAFT
(Factory Default Setting)
HQD
(High Quality Draft)
The CPI (Characters Per Inch) values are:
10, 12, 17 or 20.
The LPI (Lines Per Inch) values are:
5, 6 or 8.
Condensed
17 CPI,
The CR =>LF(Auto Line Feed) values are:
Yes or No
Automatic Line Feed (LF) after each Carriage Return (CR).
The LF/VT =>CR (Auto Carriage Return) values are:
Yes or No
Automatic Carriage Return (CR) after each Line Feed (LF) or Vertical Tabulation
(VT).
The Form Length values are:
11in (279mm) or 12in (305mm)
The Zero style values are:
Normal or Slashed
Setup
3-11
Advertisement
Table of Contents
