3.2.6
Validating
10. Load a Blank Document
11. Print the Settings
the changed parameter will be underlined; Font : HQD
3.2.7
Quitting
12. Load a Blank Document
13. Button Bar
3.3
Setup Check
Prerequisite 1:
The Configuration Settings that your department will use.
Prerequisite 2:
The printer's Current Settings. Note: Perform Printing the
Current Settings on page 2-3-8.
1. Compare prerequisite 1 with prerequisite 2
The Current Settings are the same as the Configuration Settings?
Yes
The Setup Check is
complete, Go to the
Operations Chapter.
Setup
-
perform Loading a Blank
Document with the other side
of the document you have just
used in step 8 above.
-
perform Printing the Current
Settings,
-
perform Loading a Blank
Document using the same side
of the document you have just
used in step 11, above.
-
press and hold down until the
document is returned forward
and ejected.
No
Go to Changing a Setting on page 2-3-8
and make the required changes to the
Setup.
3-9